Raw Material
Our indoor slides are meticulously crafted from high-quality, child-safe materials, ensuring exceptional durability and performance. Each component undergoes rigorous testing for strength, stability, and smoothness, providing children with a safe and reliable play experience.
1. Steel pipe: dia-48mm hot Galvanized pipe (Anti-Rust) with wall thickness 1.8-2.0 mm.It can withstand the load and impact force generated by children’s activities on the slide, ensuring the structure is stable and not easy to deform
2.Wooden Board: ordinary wood board tend to absorb moisture, swell, deform, or blister in humid environments. In contrast, moisture-resistant boards are treated with special waterproof resin, effectively preventing water penetration and making them less likely to crack or rot.
3.Safety Net: for safety nets, we offer two options: one with 4cm diameter holes and another with 8mm diameter holes. The 4cm mesh does not block the view, allowing parents to easily see their children, while the 8mm mesh meets European standards.
4.Pipe Cover: flame-retardant pipe cover, inner diameter 5cm, outer diameter 8cm, length 2.5m, with 1.5cm thick EPE inside and PVC leather on the outside.The outer material is flame retardant
5.Zip Tie: we use thicker 1.5mm zip tie, 350mm in length and 7mm in width, Stronger material,Multiple colors are available.
6. Plastic Ball: made of food-grade PE material, non-toxic and odorless. The balls have smooth surfaces with no burrs and bright colors. Each ball is 8cm in diameter to prevent swallowing, weighs 10g with a thickened design, and is air-tight without leakage.
7.Connector: compared to cast iron, Castel steel is stronger, more tough, and has higher strength. It can bear heavier loads and is less likely to break, keeping the entire frame stable and secure
8.PVC Mat: flame retardant PVC leather With thickness 0.55mm, mesh strength is 1000*1000D, strong and wear-resistant, will not be damaged as long as it is not a sharp object
9.EVA mat:Eco-friendly and non-toxic EVA mats, 2.0cm thick, soft and comfortable, slip-resistant, waterproof, and moisture-proof. Easy to install, easy to clean and maintain, with rich colors and an attractive appearance.
Indoor Playground Production Processes:
1. Do not use tape on the surface of iron parts, as it will affect the adhesion of the paint.The surface should be kept clean and flat
2. Our advanced cutting machines deliver smooth, accurate, and consistent results. Every piece is precisely shaped to ensure a perfect fit, higher efficiency, and flawless quality in every project.
3. According to the dimension drawings provided by the engineering department, we cut the pipe and then re-measure them for accuracy.±2mm
4. Using advanced pipe bending machines, ensuring smooth lines, precise angles, improves safety and efficiency — every bend reflects quality and craftsmanship.
5. Using a cutting machine to cut the wood panels according to the required dimensions. our wood boards are mold-proof and insect-resistant,Strong and durable,not easy to break
6. The wood panels and EPE foam are firmly bonded together with glue. The glue we use is environmentally friendly and non-toxic.
7. After that, we cover the surface smoothly with PVC leather and fix everything together using a staple gun.The PVC leather is 0.55mm thick, wear-resistant, durable, and easy to clean.
8. We can create different designs and customize tailored solutions for you, making your indoor playground truly unique.
High-Quality Materials & Reliable Construction
This indoor playground is produced using premium-grade materials to ensure consistent quality and long-term durability. The structure is made of high-density, non-toxic plastic with excellent strength and stability, suitable for frequent commercial use. Slides are smoothly finished with rounded edges to enhance safety and reduce maintenance issues. The materials are odor-free, wear-resistant, and compliant with international safety standards, making this product ideal for wholesalers, distributors, and project-based buyers.
Safety & Certifications
Our indoor play equipment has been certified by TUV, ensuring that every design and material meets the highest international safety and quality standards.
This certification means our products have passed strict testing procedures for structure strength, material safety, and long-term durability.
We are dedicated to creating fun, imaginative, and safe play environments for children.
With TUV-certified quality, you can have full confidence that our products deliver both joy and safety in every play experience.
Adult accessibility: adults are able to gain access to assist children within the equipment.These access openings shall ≥ 500 mm.These openings shall not be capable of being locked and shall be accessible without any additional aids (e.g. a ladder that is not an integral part of the equipment)
allow the user to leave the equipment by different routes.
If elevated platform ≥30 in (~0.76 m), you need a guardrail/barrier
1. Any narrow element opening ≤ 500mm;
2. Steep play element is at least as wide as the opening if guardrail is provided, the opening ＞500mm
3. Steep play element is wider than the opening if guardrail is provided,the opening ≤ 1200mm
Free height of fall>600 mm, Guardrails and/or barriers shall provided, shall be provided from the first step, grasp or a handrail shall be provided.
The treads shall be spaced equally, shall be of uniform construction, and shall be horizontal within ± 3°
Passes if front section fully enters aperture to a maximum depth of (template shoulder depth) 265 mm
fail if front section can’t enter or can’t enter aperture to a maximum depth of (template shoulder depth) 265 mm
Evacuation route size min1300*900,Play equipment in the evacuation route shall not reduce the route to a width of less than 900 mm or a height of less than 1300 mm.If the number of users is less than 20, the width may be reduced to 720 mm
The shortest adjusted exit path length (calculated as the sum of horizontal and vertical travel distances through the SCPE minus half the length of any slides in this path) from any point within the SCPE to the nearest exit or emergency access/egress pathway shall be no more than 12 m
The path length is the sum of the horizontal and vertical travel distances,
but half of the length of any slide in the path may be deducted (as the slide facilitates faster escape).
The term “exit” includes a regular exit, an emergency exit, or an emergency access/egress entrance.
For any slide that ends directly in front of an exit, there shall be a distance no greater than 3 000 mm between the end of the run-out section and the exit.
Moving play equipment hanging in the evacuation route, for example punching bags, shall allow easy passage through when using a manual pushing action
Items of play equipment placed inside the evacuation route shall have a depth of no more than 200 mm and there shall be a distance of at least 1 000 mm between any pieces of such play equipment which reduce the dimensions of the evacuation route.
Strict Testing & Quality Inspection
All of our products undergo rigorous testing and strict quality inspections before shipment. Each item is carefully examined throughout the production process to ensure it meets our internal quality control standards as well as relevant international safety requirements. Only products that pass all performance, safety, and durability tests are approved for delivery, ensuring consistent quality, reliability, and confidence for our customers.
Installation & Maintenance
During the installation of an indoor playground, several essential components are required, including galvanized pipe connectors such as three-way and five-way joints, hex socket screws, and column bases. The galvanized pipes serve as the main structural supports of the entire framework and are primarily used to secure various play elements in the middle sections of the structure. The connecting pipes are generally made of seamless steel pipes, which are cut to different lengths according to the specific requirements of the site.
Before shipping the tunnel slide, we conduct a trial assembly in our factory. The purpose of the trial assembly is mainly to check whether there are any issues with the product. If any problems are found, we make immediate adjustments. During this process, we also drill the necessary holes on the slide sections, making it easier and more convenient for customers to assemble the product after receiving it.
If your playground area is large or the installation process is relatively complex, we can arrange for our professional installation engineer to travel to your site and work together with your local team. Our engineer will provide on-site technical guidance, ensure the equipment is installed correctly and safely, and help your team complete the project efficiently.The installation cost is USD $150 per day
We will provide detailed installation drawings to guide you step by step through the entire installation process. If you encounter any issues during installation, please feel free to contact us at any time — we can offer video guidance to help you solve problems easily and ensure a smooth, worry-free installation experience.
We will mark the dimensions and heights on each pipe, and indicate the positions of different connectors on the pipes. This helps you quickly identify each part and complete the installation easily and efficiently.
We will also provide detailed product diagrams showing exactly which screws are needed, how many are required, and where each one should be installed, making it easy for you to complete the installation with confidence.
How to maintenance indoor playground
1. Regular cleaning: Every day you need to clean the slides, ball pools, etc., to remove dust, sand, rubbish and other debris to ensure that the indoor environment is hygienic.
2. Check for damage: Regularly check the various parts of the naughty fort, confirm that there is no damage or failure before allowing children to continue to use.
3. The staff should check the slide before opening it again after it is out of use. Wherever the users may touch it, there should be no exposed sharp edges, sharp corners, burrs and other phenomena. There should be no cracks, deformation, breaks, joints too smooth. If any abnormality is found, it will be repaired in time.
4. Dust will accumulate on the exterior of the slide regularly during the running period of the slide, and it should be cleaned regularly with the central detergent to ensure the surface finish of the slide.
5. During the suspension period, the steel structure of the slide should be inspected for anti-corrosion, and all the steel structures should be treated for anti-corrosion in time when the anti-corrosion paint is peeled off in large areas.
6.Check the connecting fasteners of the slide, and tighten the bolts in time when they are found to be loose.
Packaging & Shipping
Safe Loading, Smart Planning
Our professional loading team ensures that every item is placed inside the container safely and efficiently. Before sealing the container, our experienced staff carefully plan the layout, stacking, and protection of each component. They also arrange irregularly shaped parts in a compact way to maximize space utilization and reduce your shipping costs.
To ensure every product arrives in perfect condition, we wrap our steel parts carefully with soft cotton wadding — a premium choice that combines protection, quality, and care
It is Scratch and Impact Protection,Moisture Absorption and Rust Prevention,Protects the Painted Surface,Eco-friendly and Reusable
Each plastic part is carefully protected with double-layer packaging: first wrapped in bubble film, then covered with a durable PP film. This ensures scratch-free surfaces, shields against moisture and dust, and keeps parts clean and secure during transport and storage. Our meticulous packaging guarantees every part arrives pristine, safe, and ready to use.
Plastic balls are stored in durable woven bags that keep them clean, organized, and ready for play. The breathable mesh prevents moisture and odor, while the strong, lightweight design makes handling and transport easy. Large capacity bags save space, are reusable, and allow quick inspection of ball quantity and colors.
Foam Pipes are packed in white plastic bags to keep them clean, dry, and protected from dust, moisture, and scratches. The white color ensures a neat, professional look and helps reflect sunlight to prevent aging. Lightweight and cost-effective, this packaging keeps every pipe safe and ready for installation.
FAQ
1.What materials are used for your indoor playground?
Our indoor playgrounds are made from high-quality, non-toxic materials, including LLDPE plastic, galvanized steel pipes, foam padding, and durable PVC covers. All materials are safe for children and suitable for long-term indoor use.
2.Are your indoor playgrounds safe for children?
Yes. Safety is our top priority. All products feature rounded edges, soft padding, anti-slip surfaces, and stable structures. They are designed and tested according to international safety standards.
3.Do your products meet international safety standards?
Yes. Our indoor playground equipment can comply with standards such as CE, EN71, ASTM, or other required certifications depending on the target market.
4.Can you customize the indoor playground design?
Yes. We offer full customization services, including size, layout, color, theme, and play elements, based on your space and project requirements.
5.What is the production lead time? and shipping time
Production time usually ranges from 15 to 30 days,shipping time,The estimated shipping time to Asian countries is approximately 7–15 days. For other regions, sea freight transit time is generally around 30 days.
6.What are the payment terms?
We accept T/T, with payment terms of 30% deposit and 70% before shipment.
You are welcome to contact us for more information
